BBZGN - PYR-COAT 500 AE ASBESTOS ENCAPSULANT

  • MSDS: BBZGN
  • Manufacturer: NEW PYR COAT INC
  • Product Name: PYR-COAT 500 AE ASBESTOS ENCAPSULANT
  • National Stock Number: 6850-00F008082
Product Identification

Product ID:PYR-COAT 500 AE ASBESTOS ENCAPSULANT
MSDS Date:01/01/1987
FSC:6850
NIIN:00F008082
MSDS Number: BBZGN

Responsible Party
NEW PYR-COAT INC
6719 CADILLAC
HOUSTON, TX 77021

Emergency Phone: (713) 741-2649

Info Phone: (713) 741-2649

Cage: NEWPY

Contractor
NEW PYR-COAT INC
HOUSTON, TX 77021

Telephone: (713) 741-2649

Cage: NEWPY

Ingredients

SODIUM SILICATE (SOLUTION)- SILICATE OF SODA

CAS: 6834-92-0

RTECS: VV9275000

Fraction By Weight: 22%


SODIUM METHYL SILANOLATE

Fraction By Weight: .6%

Hazards

LD50 LC50 Mixture:>4000 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATING TO MUCOUS
MEMBRANES; CAUSES SNEEZING. SKIN: MODERATELY IRRITATING; CAUSES
DRYNESS. EYES: MAY CAUSE BURN. INGESTION: CAUSES UPSET OF GASTRO
INTESTINAL TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATING TO MUCOUS MEMBRANES;
CAUSES SNEEZING. SKIN: MODERATELY IRRITATING; CAUSES DRYNESS. EYES:
MAY CAUSE BURN. INGESTION: CAUSES UPSET OF GASTRO INTESTINAL TRACT.

First Aid

First Aid:INHALATION: GET PERSON TO FRESH AIR. SKIN: WASH WITH SOAP &
WATER. EYES: FLUSH WITH PLENTY OF WATER FOR 15 MINUTES. INGESTION:
DON'T INDUCE VOMITING; GIVE LARGE QUANTITIES OF WATER OR IF
AVAILABLE, MI LK.

Fire Fighting

Flash Point:NONE
Extinguishing Media:NOT COMBUSTIBLE
Fire Fighting Procedures:NOT COMBUSTIBLE
Unusual Fire/Explosion Hazard:NOT COMBUSTIBLE

Accidental Release

Spill Release Procedures:CONTAIN BY DIKING, VACUUM TRUCK, ETC. SOAK-UP
REMAINING WITH INERT ABSORBENT RAGS, SAND OR ETCS., PLACE IN
CONTAINERS TO AWAIT PROPER DISPOSAL. FLUSH AREA WITH WATER TO
REMOVE FINAL TRACES.

Handling

Handling and Storage Precautions:DON'T STORE IN ALUMINUM METAL TANKS.
STEEL OR CONCRETE MAY BE USED.

Exposure Controls

Ventilation:MECHANICAL
Protective Gloves:RUBBER, PLASTIC
Eye Protection:SPLASH GOGGLES, FACE SHIELD
Supplemental Safety and Health

Chemical Properties

Spec Gravity:1.20
Solubility in Water:100%
Appearance and Odor:COLORLESS; PLESANT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS & BRINE
Stability Condition to Avoid:UNDER NORMAL CONDITIONS <10F
Hazardous Decomposition Products:BECOMES SHARP & ABRASIVE MATERIAL

Disposal

Waste Disposal Methods:REUSE SPILLED MATERIAL IF POSSIBLE, OTHERWISE,
DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.